What Temperature Should a Hot Water Heater Be Set At?

Play Video

Table of Contents

What Temperature Should a Hot Water Heater Be Set At

One of the most important appliances in your home is the water heater. It provides clean, hot water for showering, brushing your teeth, and getting ready for the day. However, what temperature should a water heater be set to?

Many factors must be considered when determining this answer. If you have an electric model, set the temperature to 120-130 degrees Fahrenheit. A gas unit will work best around 140 degrees Fahrenheit or higher, depending on how well the house is insulated. In any case, keep an eye on your thermostat and make sure it doesn’t go above 160 degrees Fahrenheit.

According to your plumber Red Oak Texas, most people are unaware that a water heater has two settings: manual and automatic. Check out this guide to determine what temperature a water heater should be set at if you have an automatic setting.

What Affects Your Hot Water Temperature Setting?

What setting you should have your water heater at depends on the temperature of the incoming water, how well your house is insulated, and the size and age of your water heater.

If the weather is cold, it’s best to err on the side of caution and set your unit to a higher temperature to avoid a cold shower. This is especially important if you have children who dislike cold showers.

The temperature of the incoming water can be easily adjusted depending on which municipality your house receives hot water from and what temperature it is set at. If you find yourself with lukewarm or even scalding hot water, it’s time to contact your municipality.

If your walls are well-insulated and you aren’t using much energy overall for heating, you can set the temperature lower so that guests don’t end up with a cold shower as well. You should also check to see if your water heater has a pressure release valve. It’s better to be safe than sorry.

It is best to set the temperature below 140 degrees Fahrenheit to avoid scalding and to ensure that no one is exposed to high temperatures while using the unit or attempting to adjust it in any way.

The best way to determine the right temperature is through trial and error. If you find that your pipes are freezing on a regular basis, consult with your plumber for more information about what setting would be appropriate in this case.

What Temperature Should Your Hot Water Heater Be Set At?

There is no single correct answer to this question. You may need to adjust the temperature setting depending on your living situation, the age and make of your water heater, and municipal guidelines. Before making any changes, always consult your owner’s manual. 

A good rule of thumb for most people is to set your water heater to a temperature of 120-130 degrees Fahrenheit for an electric model and 140 degrees Fahrenheit or higher for a gas unit.

Risks of setting your unit temperature too high:

  • Expensive energy bills
  • Damage to your water heater over time
  • Scalding injuries if not careful.

Risks of setting your unit temperature too low: 

  • Guests visiting and not having a warm shower to use when they’re here
  • Cold showers in the wintertime for those that live in cold climates
  • Water that is not hot enough to get the job done correctly, such as when washing dishes or laundry

Experimentation is the best way to determine what temperature a water heater should be set at in your home. Experiment with different temperatures to see what works best for you. Keep in mind the dangers of both high and low temperatures, and you should be able to determine the ideal temperature for your home. If it’s still not working, seek the advice of a professional or contact someone at the municipality where your water heater gets its water.

Now that we’ve discussed what temperature a water heater should be set to, let’s look at how long it takes a water heater to recover. This is an important question, especially if you enjoy taking long showers.

How Long Does it Take for a Hot Water Heater to Recover?

After using all of the hot water in the tank, the average water heater will take about two hours to recover. It may take longer if you use more hot water. It will recover faster if you use less.

Laundry and dishwasher use can also have an impact on how long it takes for your unit to recover. Expect it to take even longer if you do both of these tasks at the same time. This, too, varies depending on the size of your home and the size of your water heater tank. The longer it takes for the unit to recover, the larger the tank.

If you’re dissatisfied with how long it takes your water heater to recover, you have a few options:

  • Upgrade to a tankless model
  • Install a solar-powered system

Both of these solutions will help speed up the time it takes for your water heater to recover.

Plumber in Red Oak, Texas

The question of what temperature a water heater should be set to has no single correct answer. The best way to find out for your home is to experiment and see if there are any current issues, such as scalding or freezing in specific areas due to cold weather. If not, that’s perfectly fine. However, if this is the case, feel free to increase or decrease the temperature until you’re satisfied.

Please call Dial One Johnson Plumbing, Cooling, and Heating at (972) 291-0740 for more information on how we can help you and your family with all of your plumbing and heating needs. Hopefully, this guide has answered some of your questions about what temperature a water heater should be set at and how long it takes for it to recover. Always consult with your owner’s manual first, as these instructions may vary from model to model.

Request Service

Fill out the form below and a member of our team will reach out to you as soon as possible.