What to Do When a Pipe Bursts in Your Home
A burst pipe in your home is not a fun way to spend your Sunday morning. However, there are ways to prevent further water damage in your home by turning off water supply and heating your home a little extra. Call your local plumbing company to ask about preventative steps you can take to make sure a pipe does not burst in your home.
If you suspect a burst pipe in your home contact Dial One Johnson Plumbing, Cooling and Heating for emergency services. We are the Red Oak plumbing company you need! Call Dial One Johnson at any time by phone (469) 240-5618 or the contact form online.
If you do not know what to do when your pipe bursts, keep reading.
Turn Off Water Supply
When a pipe bursts in your home the first priority is to stop all the water from going to that pipe. Even though you might not know where the burst pipe is, the less water that is in the pipe will help to decrease the amount of water damage in your home. The main water switch can be found either underneath the kitchen sink or wherever the main location of the main service pipe is. It is important that everyone in your home knows where this switch is, in case of emergencies.
Drain the Faucets
Draining the pipes is beneficial because it starts the moving process of the water. Once the water starts moving it can start the thawing process within the pipes. To drain the faucets, all you have to do is run the cold water for each faucet and flush every single toilet.
Then the hot water supply from the water heater needs to be shut off and drained. This can be done the same way that the cold water supply was drained. If you are uncomfortable performing drainage of your plumbing pipes, call a Red Oak plumbing company to help with emergency plumbing services.
Locate the Pipe That Burst
The pipe that burst will tell you how much damage is in your home. It can also tell you how much of the pipe is going to need replacement. If you find the burst pipe in the main water line then it will probably be costly to replace. This is because there are more connections that need to be replaced and because the main line holds the most amount of water.
However, if the burst is small enough you may be able to skip a replacement and have it patched up instead. This can prevent future damage, but does to be checked consistently. It is better to call an expert plumber to seal any cracks or holes in the pipes to prevent water leaks.
Bring in Warm Air or Heat
Most of the time, the reason why your pipes burst is because of the colder weather outside. The cold air will throw off the temperature of the water in the pipes and results in freezing. To thaw the pipes that have burst, you need to bring in heat and warm air.
Turn on the thermostat to a higher temperature and heat the air. You can also use a hair dryer or warm towel to thaw the frozen water within the pipe. If the pipe is not exposed, the only thing you can do is warm up the temperature in the home until a professional arrives.
Repair the Burst Pipe Yourself
If you choose to repair the burst pipe yourself then there are some important factors to consider. The type of material that is used to mend the cracks or ruptures can become costly depending on how much is needed. Any do-it-yourself repair will not last long and will put you in the same place like before.
This is why it is best to leave the repair of burst pipes to plumbers who know how to handle emergency plumbing services. These plumbers have the tools and materials needed to fix smaller and larger breaks. However, if you do want to repair the crack use a strong adhesive to hold the pipe in place so it does not burst again.
Call a Professional for Emergency Plumbing Service
Bringing in a professional for emergency services is the best decision you can make when it comes to a burst pipe. The experts in any Red Oak Plumbing company will know how to efficiently dry the area and prevent further water damage. The plumbers also have the tools needed to fix any cracks or ruptures professionally the first time. These plumbers can advise you on the next steps for how to ensure that you continue to have access to running water.
How to Prevent Burst Pipes
Preventing burst pipes for the future will help to keep your home water damage free. The main reason why your pipes probably burst in the first place is colder temperatures. The temperature outside will affect the temperature of the water in your pipes because it is not consistently staying warm.
The best way to keep water warm and moving in your pipes is insulation. You can buy foam fitted insulation that can be easily applied to the outside of the pipe. For unexposed pipes, you need to call a plumber to insulate the pipes. Another way to help prevent pipes from bursting is to keep the house at a higher temperature than it is outside.
Expert Plumbers Near Me: Red Oak, TX
In Red Oak, Texas, you are going to need a great plumbing company that will help you with any emergency services that you may need. By searching ‘plumbers near me’ you will be able to find the best and affordable plumbing company that works for you. Dial One Johnson Plumbing, Cooling and Heating is experienced in repairing and replacing a burst pipe in your home.
Call our team for your emergency needs and we will come to you as fast as we can. There is no need to worry because we will take care of everything. Sit back, relax and let the professionals do their job.
If you have an emergency leak or burst pipes call Dial One Johnson Plumbing, Cooling and Heating at (469) 240-5618. If you have an non-emergent issue, contact us on our online form.