You Don’t Want Mold, But These Plumbing Problems Are How You Get Mold

Play Video

Table of Contents

Most of us have dealt with mold in some capacity. Maybe you’ve had to replace moldy shower curtains or throw out moldy bread. Dealing with mold is gross and can even become a health hazard for some. Not to mention that if it becomes extensive then it can be expensive to get treated and removed. This is why it is so important to schedule regular plumbing maintenance and to keep an eye out for any signs of mold. 


If you have noticed or are concerned about mold growth in your home, schedule an appointment with our team at Dial One Johnson Plumbing, Cooling and Heating. Give us a call at PHONE NUMBER to schedule an appointment today. 

Conditions for Mold Growth

The best way to prevent mold growth in your home is to understand the conditions under which mold grows best. Take a look at what makes mold grow:


  • Moisture
  • 60% or more humidity
  • Dust and dirt
  • Oxygen
  • Lack of sunlight
  • Temperature between 71º F and 81º F


To keep mold under wraps, try to keep your home under 71º F and between 30%-50% humidity. You should also check dark spaces that could collect moisture in your home as often as you can. For example, the cabinet under your sink and your laundry room are extremely susceptible to mold. Here are more common sources of mold in your home:


  • Attic
  • Sump pump
  • Drain lines
  • Water heater
  • Crawlspace
  • Toilets
  • Shower curtains
  • Ceilings above showers, sinks and stoves
  • Ductwork
  • HVAC components


Some areas, such as bathrooms and kitchens, are easy to detect mold because they are cleaned so often. It’s always helpful to try your best to keep an eye out for mold in less trafficked areas such as your basement, attic or garage. As soon as you do notice mold, make sure you call a plumber so that they can find the source of moisture and fix it. 

Plumbing Issues That Cause Mold

There are many different kinds of plumbing issues that can cause mold. Anything from a burst pipe to a leaky refrigerator can cause mold growth in your home. The best way to have your home inspected for mold is to call a plumber. They know all of the most common areas where mold growth occurs and can let you know if they find any in your home. 


It is also important to schedule plumbing repairs as soon as you come across an issue. One of the biggest issues that homeowners encounter when they leave their plumbing problems for too long is mold growth. Don’t let that happen to you and take a look at the most common plumbing issues that cause mold:

Hidden Leaks

Hidden leaks can be one of the worst issues to come across. A hidden leak could go undetected for months, which is long enough for extensive mold growth to occur. If you notice ceiling moisture, discolored spots on the walls, the sound of constantly running water or high water bills, you may have a hidden leak. The best way to take care of a hidden leak is to call a plumber. 


A plumber will be able to find the location and the cause of the leak. Once they have identified the leak, they will find the best solution to fix the problem. In some cases the damage may be too far gone and you may have to replace drywall or hire a mold treatment company. This is why it is so important to schedule plumbing maintenance where they can spot these issues before too much damage is done. 

Standing Water

Standing water does not always look like a foot or two of flooding. Sometimes it can be caused by condensation that drips down from your HVAC and forms a puddle or moisture that accumulates in the basement. There are many reasons why standing water may occur, but no matter how it forms, it needs to be taken care of immediately. 


If you start to notice recurring puddles near appliances or a constant wet basement floor, then you need to call a plumber. It may only be a case of a loose hose or connection, but it could also be something worse. This is especially important for basements, as constant floor moisture could indicate an issue with your sump pump or that you need to install a sump pump. To avoid mold growth, don’t hesitate to call your plumber if you encounter this issue.

Leaky Sink and Appliances

Leaky sinks and appliances are common in all homes. A connection may have come loose or a part may be damaged. An appliance leak could potentially cause more damage which could lead to failure. Either way, if these leaks go undetected they could cause major mold problems. This is especially true for appliances with leaks underneath or behind them where you may not notice it at first. 


Mold growth can negatively affect your health and cause respiratory issues. If you notice a leaky sink or appliance you should call a plumber straight away. When you leave an issue like that for too long then it could cause mold growth on the wall or floor. A plumber will be able to quickly identify and fix the problem. 

Schedule Trustworthy Midlothian Plumbing Today

For a high quality plumber Midlothian, TX,  you need Dial One Johnson Plumbing, Cooling and Heating. Our team has got the training and qualifications necessary to get the job done right the first time. At Dial One Johnson, customer satisfaction is our highest priority. This is why we go above and beyond to provide superior workmanship and friendly service,


Our plumbers can provide plumbing maintenance, repairs and replacements for a variety of systems. With over 50 years of experience in the industry, we have got what it takes to provide only the best service possible. For Midlothian plumbing you can trust, choose Dial One Johnson.


To book an appointment, give us a call at (972) 291-0740 or contact us online.


Request Service

Fill out the form below and a member of our team will reach out to you as soon as possible.